To bring stabilization to boats as small as 23 feet, we knew we had to break the mold. The new Seakeeper 1 features a flush mount design for easier installation, runs exclusively on 12V DC power, and can be installed virtually anywhere on board.
| Technical Specifications | |
|---|---|
|
Max Rated Speed |
9,750 RPM |
|
Angular Momentum at Max Rated RPM |
1,000 N-M-S |
|
Spool-up Time to Max Rated RPM |
35 minutes (9,750 RPM) |
|
Spool-up Time to Stabilization |
18 minutes (7,310 RPM) |
|
Power Consumption |
|
|
Spool-Up Power |
600 Watts Max |
|
Spool-Up Power Input |
12 VDC @ 50 Amps Max |
|
Operating Power |
225 – 600 Watts (Sea State Dependent) |
|
DC Power Input |
12 VDC @ 19-50 Amps |
|
Control Power |
N/A |
|
Control Power Input |
N/A |
|
Seawater Pump Power Input Over Current Protection based on installed pump rating |
12 VDC @ 15 Amps Max |
|
Weight |
365 lbs (166 kg) |
|
Envelope Dimensions |
22.9 L x 23.6 W x 15.9 H (Inches) 0.582 L x 0.598 W x 0.403 H (meters) |
|
Noise Output |
~64 dB at 1 meter |
|
Seawater Supply to Heat Exchanger |
2 GPM (7.6 LPM) minimum 4 GPM (15.1 LPM) maximum |
|
Ambient Air Temperature |
32° – 140° F (0° – 60° C) |